Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Bulex Fault codes Bulex

Isotwin Condens

80 codes. Choose a code: what it means and what you can do.

The code is sometimes followed by a number (6A 227): the code is enough.
Breakdown: the boiler is stopped
F.00 Flow temperature sensor disconnected
F.01 Return sensor fault or ignition fault
F.03 Cylinder sensor or air supply fault
F.10 Flow sensor short or return sensor fault
F.11 Return sensor short or display link fault
F.13 Cylinder sensor short or main board fault
F.20 Overheating or incompatible interface
F.22 Not enough water or pressure too high
F.23 Temperature difference or poor water circulation
F.24 Temperature rising too fast
F.27 Flame detected with the burner off
F.28 Ignition failure or sensor mismatch
F.29 Flame lost during operation, relighting failed
F.32 Fan not running correctly
F.42 Coding resistor fault
F.49 eBUS line fault (controls)
F.52 Mass flow sensor not connected
F.53 Gas flow outside expected values
F.54 Gas pressure too low at start-up
F.56 Safety shutdown: CO limit exceeded
F.57 Combustion control fault
F.61 Gas valve control fault
F.62 Delayed gas valve shut-off
F.63 Circuit board memory (EEPROM) fault
F.64 Electronics or sensor fault
F.65 Electronics temperature too high
F.67 Implausible flame signal
F.68 Unstable flame signal
F.70 Invalid boiler identification
F.71 Flow sensor stuck on one value
F.72 Flow and return sensor mismatch
F.73 Water pressure sensor: signal too low
F.74 Water pressure sensor: signal too high
F.77 Flue gas flap or condensate pump fault
F.79 Hot water tank sensor fault
F.81 Storage tank charging failed
F.83 Temperature does not rise at burner start
F.84 Implausible flow-return temperature difference
F.85 Flow and return sensors wrongly fitted
F.86 External safety contact open (underfloor heating)
F12 Hot water sensor short or communication fault
F2 Hot water sensor or air supply fault
F26 Gas valve fault or temperature difference

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.