Waiting time: water shortage, temperature rising too fast
Blocking: it retries by itself
The boiler detects a water shortage, most often because the water temperature rises too fast: it blocks the burner for a waiting time, up to 20 minutes on some models. It then restarts by itself, but if the code comes back, the water pressure of the system must be checked.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check the water pressure (display or gauge): below 0.8 bar, top up the heating water as your installer showed you.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show S.54?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code S.54
The meaning depends on the boiler: find yours below.
The appliance is waiting due to lack of water
Product waiting for the safety function due to lack of water…
Waiting cycle: lack of water in the installation / temperature difference between the flow…
The appliance is in the waiting time of the blocking function for…
Product in waiting time by the safety shutdown function due to a lack of water…
Waiting period: lack of water in the circuit (difference between flow and…
Waiting time: no water in the circuit, temperature of the temperature sensor…
Product waiting for modulation lock/safety function due to…
Waiting time: no water in the system, temperature rise of the…sensor
The boilers that show this code
What our technician checks
- The system pressure
- Air in the circuit and the internal air vent
- The heating pump, its cable and connector
- The non-return valve