Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Bulex Fault code Bulex
F.23

Temperature difference or poor water circulation

Breakdown: the boiler is stopped

Water circulates poorly in the boiler: the water leaving for the heating is much hotter than the water coming back (dotted-code boilers, Thema Condens F, IsoTwin Condens F), or the temperature rises too fast because the pump works badly (older ThermoMaster F, Thema Condens F 24/30, Isotwin). It is a safety shutdown: the boiler stops to protect itself.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check the water pressure on the display or the gauge. Too low? Top up with water, as your installer showed you.
  3. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show F.23?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code F.23

The meaning depends on the boiler: find yours below.

F.023

The temperature difference between flow and return is too high

Breakdown: the boiler is stopped Isotwin Condens CS/1, Thema Condens CS/1
F.23

Safety shutdown: temperature difference too high

Breakdown: the boiler is stopped Isotwin Condens, Thema Condens, Thema Condens AS 48/65, Thema Condens F AS 80, ThemaClassic C30, Thematek C 18/24-LC/1
F.23

Safety shutdown: temperature spread too great

Breakdown: the boiler is stopped Thema Condens F AS 45/65
F.23

Safety shutdown: large temperature difference (NTC1/NTC2)

Breakdown: the boiler is stopped Thermomaster
F23

Maximum temperature difference between the sensors of the flow pipe and the…

Breakdown: the boiler is stopped Thema Condens F
F23

Water circulation fault

Breakdown: the boiler is stopped Isotwin, Thema Condens F 24/30, Thermomaster F
F23

Maximum temperature difference between the heating flow and return sensors reached

Breakdown: the boiler is stopped Isotwin Condens F

The boilers that show this code

What our technician checks

  • The pump: operation and speed
  • Bleeding the system
  • The connection of the flow and return sensors (swapped)
  • The flow and return isolating valves being open
  • The hydraulic block strainer and the water pressure sensor

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.