Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Bulex Fault code Bulex
S.39

Burner blocked by a contact thermostat

Information: nothing to do

A contact connected to the boiler has opened and is blocking the burner: usually the underfloor heating safety thermostat, or the condensate pump. The boiler keeps waiting as long as this contact is open.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check that the condensate drain pipe and its funnel are clear, without taking anything apart.
  3. Does the code stay on or come back? Do not take anything apart: call us.

Nothing to do

This message belongs to the boiler's normal operation.

Call us

The variants of code S.39

The meaning depends on the boiler: find yours below.

S.039

Burner operation is blocked by the underfloor heating contact thermostat…

Information: nothing to do Isotwin Condens CS/1, Thema Condens CS/1
S.39

The contact thermostat or the condensate pump has tripped

Information: nothing to do Isotwin Condens, Thema Condens
S.39

Underfloor heating contact open

Information: nothing to do Isotwin Condens F, Thema Condens F, Thermomaster
S.39

The contact thermostat has tripped

Information: nothing to do Thema Condens F AS 45/65
S.39

Burner off contact triggered (e.g.

Information: nothing to do Thema Condens F AS 80, ThemaClassic C30
S.39

Underfloor heating safety thermostat tripped

Information: nothing to do Thema Condens AS 48/65
S.39

"Burner off contact" triggered (e.g.

Information: nothing to do Thematek C 18/24-LC/1

The boilers that show this code

What our technician checks

  • The underfloor heating contact (safety) thermostat
  • The condensate pump

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.