Storage tank charging failed
Breakdown: the boiler is stopped
The built-in hot water tank is not fully charged within the expected time: charging pump, 3-way valve, sensors, blocked secondary heat exchanger or air in the pump; on the IsoTwin Condens F this code reports overheating of the domestic hot water circuit. This is a fault: the boiler stops and our technician has to find the cause before putting it back into service.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show F.81?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.81
The meaning depends on the boiler: find yours below.
Cylinder charging failed
Cylinder charging pump fault
Fault in the domestic hot water circuit
The boilers that show this code
What our technician checks
- The wiring harness
- The charging pump: operation, air, non-return valve; replaced if faulty
- The 3-way valve, replaced if faulty
- The secondary heat exchanger (dirt, blockage)
- The hot water connection sensor: plug and fitting on the pipe
- The tank charging and tank sensors, and the turbine flow sensor
- Air in the primary circuit and the main pump