Temperature rising too fast
Breakdown: the boiler is stopped
Water circulates poorly in the boiler: the temperature rises too fast (dotted-code boilers), or the water coming back from the heating is too hot, above 90 °C (older ThermoMaster F and ThermoMaster HR TOP); the cause is for example the pump, air, lack of water or a stuck non-return valve. It is a safety shutdown: the boiler stops to protect itself.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check the water pressure on the display or the gauge. Too low? Top up with water, as your installer showed you.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show F.24?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.24
The meaning depends on the boiler: find yours below.
The temperature is rising too quickly
Safety shutdown: temperature rising too quickly
Safety cut-out: temperature rise too fast
Safety shutdown: temperature rise too fast
Water circulation fault
Heating return temperature too high
Return temperature > 90°C
The boilers that show this code
What our technician checks
- The pump: operation and output
- Bleeding the system
- The system pressure
- The non-return valve: operation and fitting direction
- The flow and return isolating valves being open
- ThermoMaster HR TOP: the system resistance and the bypass