Internal controller fault
Breakdown: the boiler is stopped
On a Vitodens 200-W, 222-F, 222-W or 300-W, the controller reports an internal fault or a stuck reset button R (on a 222-W WS2A or a 200 WB2A, an internal fault or a strong electromagnetic interference field nearby): the burner blocks or locks out and the boiler has to be switched back on. On a Vitodens 100-W (B1HC, B1HA, WB1C), FF means a burner control unit fault: the burner stays blocked while the fault is present.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- On a Vitodens 100-W (B1HC, B1HA, WB1C), do not reset the boiler: call us if the code stays on or comes back.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show FF?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code FF
The meaning depends on the boiler: find yours below.
Burner control unit fault
Internal fault or reset button R blocked
Internal fault or "E RESET" button stuck
Internal fault or reset button R stuck
Strong interference field (EMC) nearby or internal fault
What our technician checks
- Switching the boiler back on, then the controller, replaced if it does not restart
- The reset button R, which must not be stuck
- A strong electromagnetic interference field (EMC) near the boiler
- Vitodens 100-W: the ignition electrodes and their connecting cables, then the controller