Burner control unit fault
Breakdown: the boiler is stopped
The unit that controls and monitors the burner reports a fault; on a Vitodens 200-W B2HA or WB2C, 222-F B2TA, B2SA or FR2B, 222-W B2LA or WS2B and 300-W B3HA, the code can also mean that the boiler coding plug is missing. On a Vitodens 200-W, 222-F, 222-W (except WS2A) or 300-W it is a fault that locks the burner out until a reset; on a Vitodens 100-W, a 222-W WS2A or a 200 WB2A, the burner stays blocked while the fault is present.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- On a Vitodens 100-W, a 222-W WS2A or a 200 WB2A, do not reset the boiler: call us if the code stays on or comes back.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show Fd?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code Fd
The meaning depends on the boiler: find yours below.
Burner control unit fault
Boiler coding card missing / Burner control unit fault
Gas burner control unit fault
What our technician checks
- The ignition and ionisation electrodes and their connecting cables
- A strong electromagnetic interference field (EMC) near the boiler
- The boiler coding plug: in place, replaced if the fault is sporadic
- The controller, replaced if the fault persists