Internal control fault
Breakdown: the boiler is stopped
The boiler's control reports an internal fault: if the fault does not clear, our technician replaces the control. The burner is blocked, and on a Vitodens 200-W B2HB, 222-F B2TB or B2SB, or 222-W B2LB, the boiler may also lock out and only start again after a reset.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- On a Vitodens 200-W B2HB, 222-F B2TB or B2SB, or 222-W B2LB, the boiler may lock out: in that case one reset is allowed.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
- On the other models the burner is only blocked: do not reset the boiler.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show F0?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F0
The meaning depends on the boiler: find yours below.
Internal fault
What our technician checks
- A reset with the R key, then the control replaced if the fault persists (Vitodens 200-W B2HB, 222-F B2TB, B2SB, 222-W B2LB)
- The control, replaced (other models)