Flame signal outside the allowed range
Breakdown: the boiler is stopped
The flame signal (ionisation current) measured by the boiler is outside the allowed range: the cause is the gas supply or gas pressure, the gas valve, the gas type setting or the ionisation electrode. The burner goes into fault: the boiler stops heating and only starts again after a reset.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check that the boiler's gas supply valve is open.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show E8?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code E8
The meaning depends on the boiler: find yours below.
Ionisation current outside the valid range
What our technician checks
- The gas supply: gas pressure and gas flow monitor
- The combined gas valve and its connecting cable
- The gas type assignment
- The ionisation electrode: distance to the burner grid and fouling
- The ionisation electrode and its cable (Vitodens 200-W WB2B, 222-F FS2A, 222-W WS2A)