Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
28

Flow temperature sensor open circuit

Blocking: it retries by itself

On a Vitodens 200, 222-F, 222-W or 300-W, the system flow temperature sensor, on the low loss header, is open circuit: the boiler keeps heating, but controls without that sensor. On a boiler with a Vitotronic 200 KW2 or Vitotronic 300 KW3 control (Vitola, Vitogas, Vitorond, Vitocrossal), it is the flow sensor of the heating circuit with mixing valve that is open circuit: the mixing valve closes and the rooms on that circuit may stay too cold.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 28?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 28

The meaning depends on the boiler: find yours below.

28

Open circuit of the system flow temperature sensor

Blocking: it retries by itself Vitodens 200-W B2HB, Vitodens 200-W WB2C, Vitodens 222-F B2SA, Vitodens 222-F B2SB, Vitodens 222-F B2TA, Vitodens 222-F B2TB, Vitodens 222-F FR2B, Vitodens 222-F FS2B, Vitodens 222-W B2LA, Vitodens 222-W B2LB, Vitodens 222-W WS2B, Vitodens 300-W B3HA, Vitodens 300-W B3HB
28

Open circuit of the flow temperature sensor

Blocking: it retries by itself Vitodens 200-W B2HA
28

Open circuit of the system flow sensor

Blocking: it retries by itself Vitodens 200 WB2A, Vitodens 200-W WB2B, Vitodens 222-F FS2A, Vitodens 222-W WS2A
28

Open circuit flow sensor

Blocking: it retries by itself Vitotronic 200 KW2
28

Open circuit flow sensor heating circuit M1

Blocking: it retries by itself Vitotronic 300 KW3

What our technician checks

  • The low loss header flow sensor: its resistance, compared with the curve, sensor replaced if it is far off (Vitodens)
  • With no low loss header sensor connected: parameter or coding 52:0
  • The flow sensor of the mixing valve circuit (Vitotronic 200 KW2, Vitotronic 300 KW3)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.