Fan air flow or safety temperature limiter
Breakdown: the boiler is stopped
On the Vitodens 200-W B2HB, 222-F B2TB, 222-F B2SB and 222-W B2LB, the boiler no longer detects the air flow in the fan unit: it keeps heating, but over a limited output range. On the Vitotronic 200 KW2 and Vitotronic 300 KW3 controls, the safety temperature limiter has tripped, or the fault signalling module is not connected properly: the burner stays off and the boiler cools down.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show d4?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code d4
The meaning depends on the boiler: find yours below.
The air mass flow is not detected in the fan unit
The safety cut-out has responded or the fault signalling module is not correctly connected
The high limit safety cut-out has responded or the alarm module is not correctly connected
What our technician checks
- The air mass flow sensor of the fan unit (Vitodens B2HB, B2TB, B2SB, B2LB)
- The flue, checked for flue gas build-up (Vitodens B2HB, B2TB, B2SB, B2LB)
- The safety temperature limiter (Vitotronic 200 KW2, Vitotronic 300 KW3)
- The fault signalling module (accessory) and its connection (Vitotronic 200 KW2, Vitotronic 300 KW3)