Flue gas temperature sensor open circuit
Breakdown: the boiler is stopped
The sensor that measures the flue gas temperature (on a Vitopend 100-W, the flue gas monitoring sensor) has an open circuit, in the sensor itself or in its cable. On a Vitodens 200-W B2HB, 222-F B2TB or B2SB, or 222-W B2LB, the boiler locks out and only starts again after a reset; on the other Vitodens and on the Vitopend, the burner stays blocked until the sensor is repaired; on a floor-standing boiler with a Vitotronic control (KC2B, KO1B, KW1, KW2 or KW3), the boiler keeps running.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- On a Vitodens 200-W B2HB, 222-F B2TB or B2SB, or 222-W B2LB, the boiler locks out: one reset is allowed.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
- On the other models the burner is only blocked or the boiler keeps running: do not reset it.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show b8?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code b8
The meaning depends on the boiler: find yours below.
Open circuit of the flue gas temperature sensor
Open circuit of the flue gas sensor
Open circuit of the flue gas monitoring sensor
Open circuit Flue gas sensor
Open circuit flue gas sensor
What our technician checks
- The flue gas temperature sensor and its connecting cable
- The flue gas monitoring sensor (Vitopend 100-W)
- Without a flue gas temperature sensor: coding 1F:0 in the Boiler group (Vitotronic 100 KC2B, 200 KO1B)