Flue gas temperature sensor short-circuited
Breakdown: the boiler is stopped
The sensor that measures the flue gas temperature (on a Vitopend 100-W, the flue gas monitoring sensor) is short-circuited. On a Vitodens 200-W B2HB, 222-F B2TB or B2SB, or 222-W B2LB, the boiler locks out and only starts again after a reset; on the other Vitodens and on the Vitopend, the burner stays blocked until the sensor is repaired; on a floor-standing boiler with a Vitotronic control (KC2B, KO1B, KW1, KW2 or KW3), the boiler keeps running.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- On a Vitodens 200-W B2HB, 222-F B2TB or B2SB, or 222-W B2LB, the boiler locks out: one reset is allowed.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
- On the other models the burner is only blocked or the boiler keeps running: do not reset it.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show b0?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code b0
The meaning depends on the boiler: find yours below.