Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
b7

Coding plug or burner control unit fault

Blocking: it retries by itself

On a Vitodens 200, 200-W, 222-F, 222-W or 300-W, b7 means the boiler coding plug is missing, faulty or the wrong one: the burner stays blocked. On a floor-standing boiler with a Vitotronic control (KC2B, KO1B, KW1, KW2 or KW3), the same plug is at fault and the boiler then runs on its boiler thermostat; on a Vitodens 100-W B1HC, b7 means a burner control unit fault and the boiler switches to emergency mode.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show b7?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code b7

The meaning depends on the boiler: find yours below.

b7

Burner control unit fault

Blocking: it retries by itself Vitodens 100-W B1HC
b7

Boiler coding card fault

Blocking: it retries by itself Vitodens 200-W B2HA, Vitodens 200-W B2HB, Vitodens 200-W WB2C, Vitodens 222-F B2SA, Vitodens 222-F B2SB, Vitodens 222-F B2TA, Vitodens 222-F B2TB, Vitodens 222-F FR2B, Vitodens 222-F FS2A, Vitodens 222-F FS2B, Vitodens 222-W B2LA, Vitodens 222-W B2LB, Vitodens 222-W WS2A, Vitodens 222-W WS2B, Vitodens 300-W B3HA, Vitodens 300-W B3HB
b7

Boiler coding card missing, faulty or incorrect

Blocking: it retries by itself Vitodens 200-W WB2B
b7

Coding card fault

Blocking: it retries by itself Vitotronic 100 KC2B, Vitotronic 200 KO1B
b7

Internal fault Boiler coding card

Blocking: it retries by itself Vitotronic 200 KW1
b7

Internal fault of the coding card

Blocking: it retries by itself Vitotronic 200 KW2, Vitotronic 300 KW3
b7

The boiler coding card is missing, faulty or not suitable

Blocking: it retries by itself Vitodens 200 WB2A

What our technician checks

  • The boiler coding plug, plugged in, or replaced if faulty
  • The burner control unit: power switch off and on again (Vitodens 100-W B1HC)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.