Solar hot water sensor open circuit
Blocking: it retries by itself
On the Vitodens 200-W B2HB, B2HA and WB2C, the Vitodens 300-W B3HB and B3HA and the Vitotronic 100 KC2B and 200 KO1B controls, the solar system's hot water sensor has an open circuit (broken wire); on the Vitodens 200-W WB2B and 200 WB2A, it is a sensor of the Vitosolic solar controller (terminal S2 or S3). The boiler keeps heating, but on most of these models the hot water is no longer heated by the sun until our technician has checked the sensor.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show 9C?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code 9C
The meaning depends on the boiler: find yours below.
Open circuit of the DHW temperature sensor
Open circuit of the temperature sensor, connection on S2 on the Vitosolic
Open circuit of the DHW temperature sensor, connection of the temperature sensor % to the…
Open circuit of the DHW temperature sensor, connection of temperature sensor 5 to the…
Open circuit of the temperature sensor, connection to S3 on the Vitosolic
What our technician checks
- The hot water sensor (sensor 5) on the solar control module, or the sensor on the Vitosolic solar controller (terminal S2; S3 on the Vitodens 200 WB2A)