Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
92

Solar collector sensor short circuit

Blocking: it retries by itself

On the Vitodens 200-W (B2HB, B2HA, WB2C, WB2B), 200 WB2A and 300-W (B3HB, B3HA) and the Vitotronic 100 KC2B and 200 KO1B controls, the solar collector temperature sensor has a short circuit: the boiler keeps heating, but on most of these models the hot water is no longer heated by the sun until our technician has checked the sensor. On a Vitodens 100-W B1HF, this number reports a communication fault with the ADIO electronics module, whose function switches to emergency mode, and our technician must check its connections.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 92?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 92

The meaning depends on the boiler: find yours below.

92

Short circuit of the collector temperature sensor

Blocking: it retries by itself Vitodens 200-W B2HA, Vitodens 200-W B2HB, Vitodens 200-W WB2C, Vitodens 300-W B3HA, Vitodens 300-W B3HB
92

Short circuit of the collector temperature sensor, connection on S1 on the Vitosolic

Blocking: it retries by itself Vitodens 200-W WB2B
92

Short circuit of the collector temperature sensor, connection of the temperature sensor &…

Blocking: it retries by itself Vitotronic 100 KC2B
92

Communication fault of the electronics module ADIO

Blocking: it retries by itself Vitodens 100-W B1HF
92

Short circuit of the collector temperature sensor, connection of temperature sensor 6 to…

Blocking: it retries by itself Vitotronic 200 KO1B
92

Short circuit of the collector temperature sensor, connection to S1 on the Vitosolic

Blocking: it retries by itself Vitodens 200 WB2A

What our technician checks

  • The collector sensor (sensor 6) on the solar control module, or the sensor on terminal S1 of the Vitosolic solar controller
  • The setting in the commissioning assistant, corrected if needed (Vitodens 100-W B1HF)
  • The connections and cables of the ADIO electronics module (Vitodens 100-W B1HF)
  • The PlusBus voltage, 24 to 28 V (Vitodens 100-W B1HF)
  • The node number on rotary switch S1 (Vitodens 100-W B1HF)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.