Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
71

Mains supply voltage too low

Breakdown: the boiler is stopped

On a Vitodens 200-W B2HB, 222-F B2TB or B2SB, or 222-W B2LB, the mains voltage that supplies the boiler is too low: the burner stays blocked while the voltage is too low, without locking out. On a Vitodens 100-W B1HF, code 71 reports a fan speed that is too low: the burner locks out and the boiler only starts again after a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Code 71 on a Vitodens 200-W B2HB, 222-F B2TB or B2SB, or 222-W B2LB: the burner is not locked out, do not reset the boiler.
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 71?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 71

The meaning depends on the boiler: find yours below.

71

Mains supply voltage too low

Blocking: it retries by itself Vitodens 200-W B2HB, Vitodens 222-F B2SB, Vitodens 222-F B2TB, Vitodens 222-W B2LB
71

Fan speed too low

Breakdown: the boiler is stopped Vitodens 100-W B1HF

What our technician checks

  • The boiler's power supply
  • The fan, which must not be jammed (Vitodens 100-W B1HF)
  • The gas type and flue system settings, then the unlocking (Vitodens 100-W B1HF)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.