Five failed burner starts
Breakdown: the boiler is stopped
On a Calenta, Tzerra M, Quinta Pro or Gas 210 Eco Pro, the burner has failed to start after five attempts: no ignition spark, a spark but no flame, or a flame but too little ionisation current. The boiler locks out and stays off until the cause is removed and it is reset (on a Tzerra M, which has no display, the light on the button then flashes red).
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check that the boiler's gas tap is open; if it is closed, open it.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show E:14?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code E:14
The meaning depends on the boiler: find yours below.
5 failed burner starts
Five failed burner starts
5 failed burner start attempts
The boilers that show this code
What our technician checks
- The ignition transformer and its wiring
- The ignition and ionisation electrode (3 to 4 mm gap) and its wiring
- The earthing and the condition of the burner
- The gas tap, the gas supply pressure and purging of the gas line
- The gas valve unit's operation, setting and wiring
- The air supply and flue ducts, not blocked
- The SU board, or the gas/air unit on the Tzerra M, replaced if faulty