Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Remeha Fault code Remeha
E:03

Flow sensor open or electrical fault

Breakdown: the boiler is stopped

This code does not mean the same on every boiler: on a Calenta, Tzerra M or Quinta Pro (E:03), the flow temperature sensor is open-circuit, and on a Gas 210 Eco Pro it is the heat exchanger sensor; on an Avanta Plus or Avanta Platinum Plus (E03), the control panel or its power cable is faulty or badly plugged in, and on an Avanta or Aquanta, the earthing or the control unit is at fault. In every case the boiler locks out and stays off until the cause is removed and it is reset (on a Tzerra M, which has no display, the light on the button then flashes red).

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show E:03?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code E:03

The meaning depends on the boiler: find yours below.

E03

Control panel: defective

Breakdown: the boiler is stopped Avanta Plus
E03

Control panel

Breakdown: the boiler is stopped Avanta Platinum Plus
E03

Control unit or earthing error.

Breakdown: the boiler is stopped Aquanta, Avanta
E:03

Flow temperature sensor open

Breakdown: the boiler is stopped Calenta, Quinta Pro, Tzerra M
E:03

Heat exchanger temperature sensor open

Breakdown: the boiler is stopped Gas 210 Eco Pro

The boilers that show this code

What our technician checks

  • The sensor wiring (E:03)
  • How the sensor is fitted and works, replaced if needed (E:03)
  • The electrical connections and the power cable (Avanta Plus, Avanta Platinum Plus)
  • The earthing at the wall socket and the mains plug (Avanta, Aquanta)
  • The control unit, replaced if the earthing is correct (Avanta, Aquanta)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.