Return sensor short circuit or stray flame
Breakdown: the boiler is stopped
This code does not mean the same on every boiler: on a Calenta, Tzerra M, Quinta Pro or Gas 210 Eco Pro (E:06), the return temperature sensor is short-circuited; on an Avanta, Avanta Plus, Avanta Platinum Plus or Aquanta (E06), the boiler detects a flame when there should be none (stray flame). In both cases the boiler locks out and stays off until the cause is removed and it is reset (on a Tzerra M, which has no display, the light on the button then flashes red).
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show E:06?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code E:06
The meaning depends on the boiler: find yours below.
Parasitic flame detected
Parasitic flame formation
Unwanted flame formation
Return temperature sensor short-circuited
Short circuit in the return temperature sensor
The boilers that show this code
What our technician checks
- The return sensor wiring (E:06)
- How the sensor is fitted and works, replaced if needed (E:06)
- The ignition transformer, replaced if faulty (Avanta, Avanta Platinum Plus, Aquanta)
- The control unit, replaced if faulty (E06)