Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Bulex Fault code Bulex
S.42

Burner blocked by the flue gas flap

Information: nothing to do

The burner is blocked by equipment outside the boiler: the flue gas flap (accessory) does not confirm its position, or the condensate pump has failed. As long as the block lasts, the heat demand is blocked and the boiler does not heat.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check that the condensate drain pipe and its funnel are clear, without taking anything apart.
  3. Does the code stay on or come back? Do not take anything apart: call us.

Nothing to do

This message belongs to the boiler's normal operation.

Call us

The variants of code S.42

The meaning depends on the boiler: find yours below.

S.042

Burner operation is blocked by an external unit (e.g.

Information: nothing to do Isotwin Condens CS/1, Thema Condens CS/1
S.42

The flue gas flap feedback is blocking operation of the…

Information: nothing to do Thema Condens F AS 45/65
S.42

Burner operation blocked by the feedback message from the flue gas flap…

Information: nothing to do Thema Condens F AS 80
S.42

Burner operation blocked by the feedback from the non-return flap…

Information: nothing to do Thema Condens AS 48/65, ThemaClassic C30
S.42

Flue gas flap closed

Information: nothing to do Thermomaster
S.42

Non-return valve feedback blocking burner operation…

Information: nothing to do Thematek C 18/24-LC/1

The boilers that show this code

What our technician checks

  • The flue gas flap and its feedback signal (accessory, multi-function module)
  • The condensate pump

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.