Flue gas temperature too high
Breakdown: the boiler is stopped
On the dotted Bulex boilers (F.25, F.025), the flue gas safety device stopped the boiler: the combustion gases are too hot, or the link to the flue gas temperature safety device is broken; on the Thema Condens and IsoTwin Condens CS/1, the manual names an unsuitable gas type. On the older ThermoMaster HR TOP (F25), it is the flow temperature rising too fast, and on the Isotwin H-MOD a fault of the hood sensor; in every case a technician is needed.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show F.25?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.25
The meaning depends on the boiler: find yours below.
The flue gas temperature is too high
Safety shutdown: flue gas temperature too high
Flow temperature rising too quickly
Draught hood temperature sensor fault (H-MOD)
The boilers that show this code
What our technician checks
- CS/1: the gas type and its setting
- The flue gas safety device connector and its connection
- The wiring harness
- ThermoMaster HR TOP: the system resistance and the bypass
- Isotwin H-MOD: the hood sensor and its connections