Return sensor open or internal error
Breakdown: the boiler is stopped
On a Prestige MkIII or a HeatMaster 25 C with the ESYS controller, and on a recent Prestige or HeatMaster with the ACVMax screen (Evo included), E44 means that the circuit of the return temperature sensor (NTC2 on ESYS) is open; on a Prestige MkII or a HeatMaster TC from before 2015 (MCBA controller), it means an internal error of the controller. In every case the boiler locks out and only starts again after a reset.
What you can do
- Write down the code shown and the boiler model, without opening the appliance.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show E44?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code E44
The meaning depends on the boiler: find yours below.
Internal error
NTC2 open
Return sensor circuit open
What our technician checks
- The return sensor, its connection and wiring: open circuit (ESYS, ACVMax)
- The sensor or its wiring, replaced if needed (ESYS, ACVMax)
- Restarting the boiler once the repair is done (ACVMax)
- The MCBA board, to be replaced or reprogrammed if the fault persists after two resets (MCBA)