Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
ACV Fault code ACV
E19

Flame loss or return too hot

Breakdown: the boiler is stopped

On a recent Prestige or HeatMaster with the ACVMax screen (Evo included), E19 means a flame loss: the flame goes out after the boiler has started; on a Prestige MkII or a HeatMaster TC from before 2015 (MCBA controller), it means that the return temperature (T2) has gone above 110 °C. In both cases the boiler locks out and only starts again after a reset.

What you can do

  1. Write down the code shown and the boiler model, without opening the appliance.
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show E19?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code E19

The meaning depends on the boiler: find yours below.

E19

T2 > 110°C

Breakdown: the boiler is stopped MCBA
E19

Flame failure

Breakdown: the boiler is stopped ACVMax, ACVMax Touch

What our technician checks

  • The flue ducts: no blockage (ACVMax)
  • The combustion settings: CO2 at maximum and minimum output (ACVMax)
  • The electrode rod: distance to the burner and cleanliness (ACVMax)
  • The NTC sensor wiring, replaced if needed (MCBA)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.