Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
9E

Solar circuit flow too low

Blocking: it retries by itself

On the Vitodens 200-W B2HB, B2HA and WB2C, the Vitodens 300-W B3HB and B3HA and the Vitotronic 100 KC2B and 200 KO1B controls, the fluid in the solar circuit is not flowing, or too little, or the circuit's monitoring thermostat has tripped. The boiler does not stop: it keeps running, but our technician must check the solar pump and circuit.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 9E?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 9E

The meaning depends on the boiler: find yours below.

9E

Flow rate too low or absent in the solar circuit or the monitoring thermostat has tripped

Blocking: it retries by itself Vitodens 200-W B2HB, Vitodens 300-W B3HA, Vitodens 300-W B3HB, Vitotronic 100 KC2B, Vitotronic 200 KO1B
9E

Flow rate too low or absent in the collector circuit, or the monitoring thermostat has responded

Blocking: it retries by itself Vitodens 200-W B2HA, Vitodens 200-W WB2C

What our technician checks

  • The solar circuit pump and the solar circuit
  • Acknowledging the fault message once the cause is fixed

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.