Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
99

Open circuit on solar module sensor 10

Blocking: it retries by itself

On the Vitodens 200-W B2HB, B2HA and WB2C, the Vitodens 300-W B3HB and B3HA and the Vitotronic 100 KC2B and 200 KO1B controls, temperature sensor 10 of the solar control module has an open circuit (broken wire). The boiler does not stop: it keeps running, but our technician must check the sensor.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 99?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 99

The meaning depends on the boiler: find yours below.

99

Open circuit of the temperature sensor aÖ

Blocking: it retries by itself Vitodens 200-W B2HA, Vitodens 200-W B2HB, Vitodens 200-W WB2C, Vitodens 300-W B3HA, Vitodens 300-W B3HB
99

Open circuit of the temperature sensor aÖ connection to the solar control module, type SM1

Blocking: it retries by itself Vitotronic 100 KC2B
99

Open circuit of temperature sensor 10, connection to the solar control module, type SM1

Blocking: it retries by itself Vitotronic 200 KO1B

What our technician checks

  • Temperature sensor 10 on the solar control module (type SM1 on the Vitotronic 100 KC2B and 200 KO1B), as its manual describes

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.