Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
82

Flame signal missing or too weak

Breakdown: the boiler is stopped

When the burner starts, the boiler detects no flame signal, or a signal that is too weak. The burner locks out and the boiler only starts again after a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check that the boiler's gas tap is open.
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 82?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 82

The meaning depends on the boiler: find yours below.

82

The flame signal is absent or too weak when the burner starts

Breakdown: the boiler is stopped Vitodens 200-W B2HB, Vitodens 222-F B2SB, Vitodens 222-F B2TB
82

Flame signal absent or too weak when the burner starts

Breakdown: the boiler is stopped Vitodens 222-W B2LB

What our technician checks

  • The ionisation electrode and its connecting cable
  • The plug connections: no loose contact
  • Deposits on the electrodes and their source in the combustion air: laundry or cleaning products, body care products, chimney

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.