Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Vaillant Fault code Vaillant
N.270

Hot water side temperature difference too high

Breakdown: the boiler is stopped

The temperature difference measured across the heat exchanger that makes the domestic hot water is too large. The appliance switches to emergency mode, with reduced comfort, and the code does not clear by itself: our technician has to step in.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show N.270?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code N.270

The meaning depends on the boiler: find yours below.

N.270

The temperature difference is too high at the secondary heat exchanger

Breakdown: the boiler is stopped VCW CS/1-5, VCW CS/1-7

What our technician checks

  • How the hot water sensor is mounted on the pipe
  • The cold water inlet strainer, to be cleaned or replaced
  • The cold water adjusting valve: fitted and set right (boilers without a factory flow limiter)
  • The wiring connection of the stepper motor and the circuit board
  • Scale in the secondary heat exchanger
  • The 3-way diverter valve
  • The flow limiter

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.