Impressed current anode fault
Breakdown: the boiler is stopped
The hot water tank's impressed current anode is faulty or badly connected; if no anode is fitted, the plug with jumper required on the circuit board is missing. This is a fault: the boiler stops and our technician has to find the cause before putting it back into service.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show F.82?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.82
The meaning depends on the boiler: find yours below.
Impressed current anode fault
Impressed current anode fault (if installed as an accessory)
Impressed current anode controller error
The boilers that show this code
What our technician checks
- The impressed current anode and its wiring harness
- With no anode: plug X43 with jumper on the circuit board
- The anode power supply and the cable to the board