Not enough water in the boiler
Breakdown: the boiler is stopped
The boiler has no water or not enough: the heating system pressure is too low (below 0.5 bar on an ecoTEC plus), or the boiler no longer measures it correctly (pressure sensor, cable, pump). It is a safety shutdown: the boiler stops so as not to fire dry.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check the water pressure on the display or the gauge. Too low? Top up with water, as your installer showed you.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show F.22?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.22
The meaning depends on the boiler: find yours below.
There is no water, or not enough water, in the product, or the water pressure is too low.
dry firing
Safety shutdown lack of water
Safety shutdown: lack of water
Appliance operating without water
The boilers that show this code
What our technician checks
- Filling the system and bleeding it
- Leaks in the boiler and the system
- The water pressure sensor, replaced if needed
- The cable to the pump and to the pressure sensor
- The heating pump
- The wiring harness
- The automatic filling loop and the internal expansion vessel