Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Vaillant Fault code Vaillant
F.229

Re-ignition failed in emergency mode

Breakdown: the boiler is stopped

The boiler was running in emergency mode, the flame went out and, in that state, the burner failed to light again. The boiler goes into fault mode and stops until the cause is fixed and it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check that the gas shut-off valve is open.
  3. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show F.229?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code F.229

The meaning depends on the boiler: find yours below.

F.229

The appliance was in emergency operation

Breakdown: the boiler is stopped VCW CS/1-5, VCW CS/1-7

What our technician checks

  • The emergency mode and the fault history
  • The gas supply and the dynamic gas pressure
  • The gas type, its setting and the gas valve offset
  • The ignition electrode and transformer, with their wiring harnesses
  • The earthing of the appliance
  • The whole flue path and the air intake tube
  • The condensate drain, the trap and the combustion chamber
  • The gas valve

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.