Ignition failed in emergency mode
Breakdown: the boiler is stopped
The boiler was running in emergency mode and, in that state, the burner failed to light during the start phase. The boiler goes into fault mode and stops until the cause is fixed and it is reset.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check that the gas shut-off valve is open.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show F.228?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.228
The meaning depends on the boiler: find yours below.
The appliance was in emergency operation
What our technician checks
- The emergency mode and the fault history
- The gas shut-off valve, the supply pressure and the dynamic gas pressure
- The gas type, its setting and the gas valve offset
- The ignition electrode and transformer, with their wiring harnesses
- The earthing of the appliance
- The whole flue path and the air intake tube
- The condensate drain, the trap and the combustion chamber
- The gas valve and the burner