Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Junkers Fault code Junkers
A8

Communication with the controller interrupted

Breakdown: the boiler is stopped

The boiler no longer communicates with the devices on its bus, such as the thermostat or the controller and their modules: a connecting cable or one of those devices is at fault. On a Cerapur ZWB-4 (A8 323) it is a blocking fault: the boiler starts again by itself once the link is back; on the other models it stops and only starts again after a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Code A8 323 on a Cerapur ZWB-4: the boiler restarts by itself once the fault has cleared, do not reset it.
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show A8?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code A8

The small number shown beside the code tells which.

A8

CAN communication interrupted

Breakdown: the boiler is stopped Cerapur, Cerapur ZWB-3, Cerapur ZWBR-3, CerapurSmart, Cerasmart, ZWC-3
A8
323

BUS communication interrupted

Blocking: it retries by itself Cerapur ZWB-4

The boilers that show this code

What our technician checks

  • The connecting cable between the boiler and the bus devices, replaced if needed
  • The thermostat or the connected controller
  • The bus module (Cerasmart, older Cerapur)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.