Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Junkers Fault code Junkers
E2

Flow temperature sensor faulty

Breakdown: the boiler is stopped

The flow temperature sensor, which measures the water sent to the heating, is faulty: the sensor or its cable is broken or short-circuited. On a Cerapur ZWB-4 the fault first shows as E2 350 or E2 351 and the boiler starts again by itself if it clears; if it persists it becomes E2 222 or E2 223 and, as on the other models, the boiler stops until it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Codes E2 350 or E2 351 on a Cerapur ZWB-4: the boiler restarts by itself once the fault has cleared, do not reset it.
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show E2?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code E2

The small number shown beside the code tells which.

E2

Flow NTC faulty

Breakdown: the boiler is stopped Cerapur ZWB-3, Cerapur ZWBR-3, CerapurSmart
E2

The flow NTC is faulty

Breakdown: the boiler is stopped ZWC-3
E2

Flow NTC is faulty

Breakdown: the boiler is stopped Eurostar ZWE-4
E2

Flow NTC is open circuit or short-circuited

Breakdown: the boiler is stopped Cerapur, Cerasmart
E2
222

Flow temperature sensor faulty (short circuit)

Breakdown: the boiler is stopped Cerapur ZWB-4
E2
223

Flow temperature sensor faulty (open circuit)

Breakdown: the boiler is stopped Cerapur ZWB-4
E2
350

Flow temperature sensor faulty (short circuit)

Blocking: it retries by itself Cerapur ZWB-4
E2
351

Flow temperature sensor faulty (open circuit)

Blocking: it retries by itself Cerapur ZWB-4

The boilers that show this code

What our technician checks

  • The flow temperature sensor (NTC) and its cable (break, short circuit), replaced if needed

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.