Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Bulex Fault code Bulex
S.51

Flue gas path disturbed

Information: nothing to do

On the ThemaTek C 18/24-LC/1, the boiler reports a disturbed flue gas path: too high a temperature in the flue gas path or an open temperature limiter; on the ThemaClassic C30, the same code reports a hindered flow while the burner runs. It is a status message, not a locked fault, but if it comes back often, the flue must be checked without delay.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Smell flue gas in the room? Open doors and windows wide, switch the boiler off and call us.
  3. Does the code stay on or come back? Do not take anything apart: call us.

Nothing to do

This message belongs to the boiler's normal operation.

Call us

The variants of code S.51

The meaning depends on the boiler: find yours below.

S.51

Flue gas route disrupted: excessive temperature in the flue gas route…

Information: nothing to do Thematek C 18/24-LC/1
S.51

Flow obstructed during burner operation

Information: nothing to do ThemaClassic C30

What our technician checks

  • The whole flue
  • The flue gas path temperature and the temperature limiter

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.