Flow sensor or flue gas sensor fault
Breakdown: the boiler is stopped
On the older ThermoMaster F, ThermoMaster HR TOP, Thema Condens F 24/30 and Isotwin (F6 without a dot), the heating flow temperature sensor is disconnected, short-circuited or faulty. On the ThemaClassic C30 and the ThemaTek C 18/24-LC/1 (F.06), the inner flue gas sensor is disconnected; in both cases it is a fault that needs a technician.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Do not reset and do not take anything apart: call us.
Does your boiler show F6?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F6
The meaning depends on the boiler: find yours below.
NTC sensor open circuit (internal flue gas temperature sensor)
PTC sensor open circuit (internal flue gas temperature sensor)
Heating flow temperature sensor fault
Flow NTC faulty
The boilers that show this code
What our technician checks
- Older boilers: the flow sensor's connections and cables
- Older boilers: the flow sensor, replaced if needed
- ThemaClassic C30, ThemaTek: the inner flue gas sensor and its connector
- ThemaClassic C30, ThemaTek: the appliance reference setting
- ThemaClassic C30, ThemaTek: the wiring harness and the multi-pin connector