Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Vaillant Fault code Vaillant
F.719

Fan module: overheat safety open

Breakdown: the boiler is stopped

On a flexoTHERM exclusive or flexoCOMPACT exclusive heat pump that draws its heat from the outdoor air, F.719 reports that the overheat safety of the defroster in the fan module has opened: flow too low or brine above 65 °C, defrosting outside its permitted range, or defrosting with the brine circuit not filled. The safety resets by itself once the temperature drops below 30 °C; if it went above 115 °C, its fuse element has blown and our technician must replace it.

What you can do

  1. Write down the code shown and the heat pump model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show F.719?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code F.719

The meaning depends on the boiler: find yours below.

F.719

Vent. module: overheat. prot. open

Breakdown: the boiler is stopped flexoTHERM exclusive VWF ../4

What our technician checks

  • Circulation by the brine circuit pump
  • The shut-off valves, opened if needed
  • Fuse F1 of the air-to-brine collector, replaced if needed
  • The safety temperature limiter, replaced if its fuse element has blown

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.