Compressor inlet temperature sensor fault
Breakdown: the boiler is stopped
On an aroTHERM, versoTHERM plus, recoCOMPACT exclusive, flexoTHERM exclusive or flexoCOMPACT exclusive heat pump, the temperature sensor at the compressor inlet no longer sends a valid signal: the sensor is faulty, badly connected or short-circuited. This is a fault: the heat pump no longer works normally (depending on the fault, it may keep running in emergency mode) and our technician has to find the cause.
What you can do
- Write down the code shown and the heat pump model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show F.514?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.514
The meaning depends on the boiler: find yours below.
Sensor error: compressor inlet temp.
Sensor fault: compressor inlet temp.
Compressor inlet temperature sensor signal invalid
What our technician checks
- The compressor inlet temperature sensor, replaced if necessary
- The sensor wiring harness and plug, replaced if necessary
- The sensor connection to the PCB, and the PCB itself