Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Vaillant Fault code Vaillant
F.23

Flow-return temperature difference too large

Breakdown: the boiler is stopped

The water leaving for the heating is much hotter than the water coming back: water circulates poorly in the boiler, for example a blocked or weak pump, air or lack of water, or flow and return sensors swapped. It is a safety shutdown: the boiler stops to protect itself.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check the water pressure on the display or the gauge. Too low? Top up with water, as your installer showed you.
  3. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show F.23?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code F.23

The meaning depends on the boiler: find yours below.

F.023

The temperature difference between flow and return is too high.

Breakdown: the boiler is stopped VCW CS/1-5, VCW CS/1-7
F.23

Lack of water, temperature difference between flow and return sensors too large

Breakdown: the boiler is stopped VCW /3
F.23

Safety shutdown temp. difference too high

Breakdown: the boiler is stopped VC /8-5, VCW /5-3, VCW /5-5, VCW /5-7
F.23

Safety shutdown: temperature difference too high

Breakdown: the boiler is stopped VC /4-5, VC 486/5-5, VC 806/5-5, VCC /4, VUW /4-5, VUW /5-5
F.23

Lack of water, temperature difference between flow and return sensors too great

Breakdown: the boiler is stopped VUW /3-5
F.23

Lack of water (flow/return temperature difference too high)

Breakdown: the boiler is stopped VSC /2

The boilers that show this code

What our technician checks

  • The pump: operation and output
  • Bleeding the system and its water content
  • The connection of the flow and return sensors (swapped)
  • The flow and return sensors and their wiring
  • The three-way valve and the internal expansion vessel
  • The hydraulic block strainer and the water pressure sensor

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.