Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
146

Configuration, internal fault or pump flow

Breakdown: the boiler is stopped

The meaning depends on the boiler: configuration error (collective message) on a Trigon XXL, sensor or device configuration on a Straton XL, internal fault on a Thision S Plus or Trigon S Plus, too low a flow rate reported by the pump on a Thision L Plus or Trigon L Plus. Except on the Straton XL, where it shows as a technical fault, the boiler goes into safety lockout and the cause must be removed before it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. On a Trigon XXL, Thision L Plus, Trigon L Plus, Thision S Plus or Trigon S Plus, the boiler has gone into safety lockout.
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.
  5. On a Straton XL this code is a technical fault: do not reset the boiler.
  6. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 146?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 146

The small number shown beside the code tells which.

146

Configuration error collective message

Breakdown: the boiler is stopped Trigon XXL
146

Internal fault

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus
146

Sensor/device configuration

Blocking: it retries by itself Straton XL
146
1

Pump Feedback Low Flowrate

Breakdown: the boiler is stopped Thision L Plus, Trigon L Plus
146
2

Pump Feedback Low Flowrate

Breakdown: the boiler is stopped Thision L Plus, Trigon L Plus

What our technician checks

  • The configuration of the connected sensors and devices (Trigon XXL, Straton XL)
  • The boiler pump and the flow rate it reports (Thision L Plus, Trigon L Plus)
  • The boiler's controller (internal fault, Thision S Plus and Trigon S Plus)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.