Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
103

Communication error or flow check

Breakdown: the boiler is stopped

The meaning depends on the boiler: on a Trigon XXL, Thision S Plus or Trigon S Plus the controller reports a communication error; on a Thision L Plus or Trigon L Plus, flow check 1 (or 3 or 4) of the burner module shown next to the code has failed three times. Either way the boiler goes into safety lockout and the cause must be removed before it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 103?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 103

The small number shown beside the code tells which.

103

Communication error

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus, Trigon XXL
103
1

Flow Check 1 (or 3 or 4) Three Times

Breakdown: the boiler is stopped Thision L Plus, Trigon L Plus
103
2

Flow Check 1 (or 3 or 4) Three Times

Breakdown: the boiler is stopped Thision L Plus, Trigon L Plus

What our technician checks

  • The controller's communication links, including the LPB bus (terminals 139 and 140 on a Trigon XXL) (Trigon XXL, Thision S Plus, Trigon S Plus)
  • Flow check 1, 3 or 4 of the burner module shown next to the code (Thision L Plus, Trigon L Plus)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.