Gas valve position out of tolerance
Blocking: it retries by itself
The gas valve position signal is out of tolerance (on a WTC-GW or WTC-GB B series boiler it can also be the fan's). It is a warning: the boiler does not lock out and the message clears by itself once the cause is fixed.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show W62?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code W62
The meaning depends on the boiler: find yours below.
Gas valve or turbo motor position signal out of tolerance
Gas valve position signal out of tolerance
What our technician checks
- The ionisation electrode, replaced if needed
- Flue tightness and the condensate drain
- The gas supply pressure
- The gas type setting
- The fan, replaced if needed