False flame detected by the boiler
Breakdown: the boiler is stopped
The boiler sees a flame signal that does not come from the normal flame of its burner (false flame), on a WTC-GW or WTC-GB B series boiler, a WTC-GW C series boiler, a Thermo Condens WTC-A or a WTC-OB oil boiler; on the WTC-OB it can be the ignition spark reflecting on an oil film in the combustion chamber, or a leaking solenoid valve. For safety the boiler locks out and stops heating until the fault is cleared.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show F23?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F23
The meaning depends on the boiler: find yours below.
Extraneous light
Extraneous light, e.g. reflection of the ignition spark on an oil film in the combustion chamber / Leaking solenoid valve
What our technician checks
- The electrical connection: phase position and protective earth
- The measures against electromagnetic interference
- On the WTC-OB: the stray light source and the flame sensor
- On the WTC-OB: the tightness of the solenoid valve, replacing the oil pump
- The boiler electronics if the fault keeps coming back (WEM-FA-G, SCU, WCM-CPU or WCM-OB-CPU)