Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Weishaupt Fault code Weishaupt
W12

Flow water above 95 °C

Blocking: it retries by itself

The water leaving the boiler is above 95 °C: the burner stops and the pump keeps running to carry the heat away. It is a warning: the boiler restarts by itself once the temperature has dropped, but a WTC-OB oil boiler locks out (F12) after 12 warnings.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show W12?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code W12

The meaning depends on the boiler: find yours below.

W12

Flow sensor temp. > 95 °C

Blocking: it retries by itself WTC-GW C (WEP), WTC-GW/GB B (WEM)
W12

Boiler temperature ≥ 95°C

Blocking: it retries by itself Thermo Condens WTC-A (WCM)
W12

Temperature at flow sensor > 95 °C (after 12 alarms, the system locks out…

Blocking: it retries by itself WTC-OB (WCM-OB)

What our technician checks

  • The water flow through the boiler, increased if needed
  • The water circulation and the pump
  • The water fill of the system
  • Venting the water side
  • Dirt or scale in the heat exchanger on the water side

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.