Calibration too far from previous or BCC error
Breakdown: the boiler is stopped
On a WTC-GW or WTC-GB B series boiler and on a Thermo Condens WTC-A, the new combustion (SCOT) calibration is too far from the previous value, for example when the combustion air is dusty or when no recalibration was done after a part was replaced; on a WTC-OB oil boiler, the BCC data transfer failed or the wrong key is fitted. The boiler locks out and stops heating until our technician has redone the calibration or the transfer.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show F65?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F65
The meaning depends on the boiler: find yours below.
SCOT base value deviation too large compared with the previous one
The new calibration deviates too much from the previous value
The data transfer was not carried out correctly (e.g. the [Enter] key was not pressed… / Wrong BCC coding plug fitted
What our technician checks
- A calibration through the final measurement (P39 on the WTC-A)
- The ionisation electrode
- The burner, to be cleaned, and the cleanliness of the combustion air
- The data transfer from the coding key and the right BCC key (WTC-OB)