Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
F6

Flue gas monitor: boiler locked out

Breakdown: the boiler is stopped

On a Vitopend 100-W connected to a chimney (WH1D or A1JA), the flue gas monitor has tripped again and again, 10 times within 24 hours (code 0E): the flue gas is not leaving through the flue as it should. For safety the burner locks out: the boiler stops heating and only starts again after a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Can you smell flue gas? Switch the boiler off, air the room where it stands, close the doors to the living rooms and call us.
  3. Keep the air vents of the boiler room clear; a cooker hood or extractor fan running at the same time can draw the flue gas back in.
  4. Do not reset the boiler: call us.

Does your boiler show F6?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code F6

The meaning depends on the boiler: find yours below.

F6

The flue gas monitoring has responded

Breakdown: the boiler is stopped Vitopend 100-W A1JA, Vitopend 100-W WH1D

What our technician checks

  • The flue gas monitoring sensor
  • The flue (the measure of code 0E, which comes before F6)
  • The reset: main switch 8 off and on again, or the reset knob

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.