Flue gas escape detected, tolerance time
Blocking: it retries by itself
The atmoVIT, turboVIT combi and atmoTEC VUW 244/4-5 have detected flue gas escaping and run a tolerance time of 30 or 55 seconds; the atmoTEC and turboTEC VU/VUW /3 show the same 55-second tolerance time, and the atmoTEC VUW /5-5 a hindered flow while the burner runs. It is a status message, not a locked fault, but if it comes back often, the flue must be checked without delay.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Smell flue gas in the room? Open doors and windows wide, switch the boiler off and call us.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show S.51?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code S.51
The meaning depends on the boiler: find yours below.
The appliance has detected a flue gas escape and is within the tolerance period of
The appliance is within the 55 s tolerance period
Flow impeded during burner operation
Product in a 55-second tolerance period due to risk of flue gases escaping
The boilers that show this code
What our technician checks
- The flue: defect or blockage
- The chimney draught
- The combustion air supply to the room
- An extractor fan or cooker hood causing backdraught