Flow too low in the heating circuit
Blocking: it retries by itself
On a Vaillant aroTHERM Split (VWL ../5 AS), aroTHERM plus (VWL ../6 A), aroTHERM pure, aroTHERM Split plus, versoTHERM plus, recoCOMPACT exclusive or flexoTHERM exclusive heat pump, not enough water is flowing through the heating circuit: the flow is below the minimum, for example because all radiators or circuits are closed or the circuit pump is faulty. This is a status code, not a fault: it clears by itself once the flow is sufficient again; if it stays or comes back, our technician needs to check the circuit.
What you can do
- Write down the code shown and the heat pump model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show S.275?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code S.275
The meaning depends on the boiler: find yours below.
Heating circuit: flow too low
Building circuit volume flow too low
Building circuit: flow too low
What our technician checks
- The strainers of the heating circuit, free of blockage
- The shut-off valves and the thermostatic valves
- A flow of at least 35 % of the nominal flow rate
- The operation of the heating circuit pump