Outdoor temperature sensor fault
Breakdown: the boiler is stopped
On an aroTHERM Split plus, aroTHERM pro or aroTHERM plus VWL ../8.1 (with or without iQconnect) heat pump, the outdoor temperature sensor signal is not valid: the sensor is not connected, faulty or not installed. This is an emergency mode: the heat pump compensates for the problem with reduced comfort, and the code stays on until our technician steps in.
What you can do
- Write down the code shown and the heat pump model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show N.521?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
Choose a recognised installer
Ecowatt is a Vaillant installer: our group is on Vaillant's official list of installers.
The variants of code N.521
The meaning depends on the boiler: find yours below.
Outdoor temperature sensor signal invalid
What our technician checks
- The controller settings
- The outdoor temperature sensor
- The plug on the circuit board and the wiring harness, then the sensor, replaced if needed (aroTHERM VWL ../7.1, ../8.1)
- Without an outdoor sensor: weather-compensated control switched off (D.162)
- The circuit board, replaced if faulty (aroTHERM VWL ../7.1, ../8.1)